Location | Lift Components | English   
logo
E-mail: comercial@mevcomponents.com  -  Telf: (34) 961 322 364   -  Fax: (34) 963 010 203


Permanent magnet synchronous gearless motor. Silent, low consumption, low maintenance and no oil.

Suitable for all types of installations, with or without machine room, machine on top or bottom.

Supplied with Auto-tuning done in our facilities for a fast Start-up of the drive unit.

With a Brake certified as a safety device against uncontrolled upward movements of the lift car and against the involuntary movement of the lift car between floors.

Possibility of supplying different encoder systems fully compatible with the drive unit to suit any frequency inverter in the market:

  • Absolute Encoder Sin-Cos Protocol 2048 pulses/revolution
  • Absolute Encoder EnDat Protocol 2048 pulses/revolution
  • Incremental Encoder

TECHNICAL CHARACTERISTICS
Reference
Load
(kG)
Speed
(m/s)
Sheave
P (mm)
A (mm)
B (mm)
Torque
(Nm)
RPM
(r.p.m)
Power
(kW)
Roping
MG220075119
160
1,00
160
75
455
98
119
1,00
1:1
MG220100119
225
1,00
160
100
480
110
119
1,38
1:1
MG220125119
300
1,00
160
125
505
146
119
1,84
1:1
MG220100091
160
1,00
200
100
480
104
91
1,00
1:1
MG220125091
225
1,00
200
125
505
146
91
1,38
1:1
MG220175091
300
1,00
200
175
555
195
91
1,84
1:1










MG220075239
320
1,00
160
75
455
98
239
1,96
2:1
MG220100239
450
1,00
160
100
480
138
239
2,76
2:1
MG220150239
630
1,00
160
150
530
193
239
3,86
2:1
MG220100182
320
1,00
200
100
480
130
182
1,96
2:1
MG220175182
450
1,00
200
175
555
183
182
2,76
2:1
MG220175182
630
1,00
200
175
555
256
182
3,86
2:1

DRAWINGS

STANDARD EQUIPMENT

  • Drive unit with traction sheave.
  • Sheave protection according to EN81, adaptable for rope angle.
  • Absolute Encoder Sin-Cos Protocol.
  • Encoder connection via a 5 m cable and a 15 pin Sub-D connector.
  • Dual circuit brake certified as a safety component.
  • Connection box for motor cable, micro switches and thermal protection.

OPTIONS

  • Absolute Encoder EnDat Protocol 2048 pulses/revolution.
  • Incremental encoder.
  • Manual brake release lever.

SAFETY STANDARDS

Complies with:

  • 95/16/EC European Directive on Lifts.
  • EN 81-1: 1998 + A3: 2009 Harmonized Standard for Electric Lifts.